Furuno MU-190 User Manual

1.  MOUNTING, WIRING

Flush mount, fix at front is the standard installation method.

1. Use the flush mounting template (supplied) to make a cutout in the mounting location.
2. Attach the flush mounting 

sponges H19 and V19 to the 
back of the monitor unit in the 
order shown in the figure at 
right.

3. Attach the flush mount panels 19 to the monitor unit from the rear with the binding head 

screws (M4x10, 6 pcs., supplied).

Note: Attach the flush mount panels to both sides of the monitor unit with no gap.

4. Connect all cables at the back of the monitor unit. See section 1.8.
5. Set the monitor unit assembly to the cutout.
6. Fix the monitor unit to the cutout with the self-tapping screws (5x20, 4 pcs., supplied).

Flush Mounting 
Sponge H19 (5 mm) 
for top and bottom

Flush Mounting 
Sponge V19 (2 mm) 
for left and right

Binding Head Screw

Flush Mount Panel 19

Self-Tapping Screw 

(4 places)