Furuno MU-190 User Manual

1.  MOUNTING, WIRING

The flush mount, fixed at rear method allows you to attach a hood assembly OP26-6 (option) to 
the monitor unit.

1. Use the flush mounting template (supplied) to make a cutout in the mounting location.
2. Fix the hood fixing plates 19 to the right and left sides of the monitor unit with the flat head 

screws (6 pcs.).

3. Attach the F-mount hood packing 19 to the top and bottom brims. Then, attach the flush 

mounting sponge V 19 to the right and left brims of the monitor unit from the rear side.

4. Follow steps 3 to 9 in section 1.4 to fix the monitor unit to the mounting location.
5. Loosely fix the knobs (4 pcs.) to the hood fixing plate 19 from inside the plate.

Hood (19) Assembly

OP26-6-1

001-080-970

1

Flush Mounting Sponge V 19

26-005-3124

100-351-560-10

2

Hood Fixing Plate 19

26-005-3302

100-351-611-10

2

F-Mount Hood Packing 19

26-005-3305

100-351-620-10

2

Knob M4

03-163-2303

100-343-602-10

4

Flat Head Screw

M3x8

000-172-167-10

6

Flush Mounting Template

C42-00910

000-172-637-10

1

Hood Fixing Plate 19

Flat Head Screw

F-Mount Hood 
Packing 19 for 
top and bottom

Flush Mounting 
Sponge V 19 for 
left and right