Furuno MU-190 User Manual
2. ADJUSTMENTS
13
1. Press the S or T key to select the menu item to adjust on the [INSTALLATION SETTING]
menu. The menu item and setting currently selected (the cursor) is shown in orange.
2. Press the W or X key to change the setting.
3. After you adjust all settings, press the T key to select [SAVE AND EXIT]. The confirmation
3. After you adjust all settings, press the T key to select [SAVE AND EXIT]. The confirmation
message appears.
4. Press the X key. The settings are saved and the menu is closed.
Note: To cancel the settings, press the W key. The indication changes from [YES] to [NO] and
you can move the cursor to the menu items with the S key.
you can move the cursor to the menu items with the S key.
[INSTALLATION SETTING] menu descriptions
Menu item
Function
Setting
[EXT BRILL CTRL] Adjust the brilliance of the monitor unit from the external
equipment.
[OFF]: You can not adjust the brilliance from the external
equipment. You can adjust the brilliance with the /
BRILL key.
[DVI1]: When the DVI1 signal is shown, you can adjust
the brilliance of this display from the equipment connect-
ed to DVI-D1 port. For the screen other than the DVI1,
you can adjust the brilliance with the /BRILL key.
[DVI2]: When the DVI2 signal is shown, you can adjust
the brilliance of this display from the equipment connect-
ed to DVI-D2 port. For the screen other than the DVI2,
you can adjust the brilliance with the /BRILL key.
[RS-232C]:You can adjust the brilliance from the equip-
ment connected to RS-232C port.
[RS-485], [USB]: No use.
[OFF]: You can not adjust the brilliance from the external
equipment. You can adjust the brilliance with the /
BRILL key.
[DVI1]: When the DVI1 signal is shown, you can adjust
the brilliance of this display from the equipment connect-
ed to DVI-D1 port. For the screen other than the DVI1,
you can adjust the brilliance with the /BRILL key.
[DVI2]: When the DVI2 signal is shown, you can adjust
the brilliance of this display from the equipment connect-
ed to DVI-D2 port. For the screen other than the DVI2,
you can adjust the brilliance with the /BRILL key.
[RS-232C]:You can adjust the brilliance from the equip-
ment connected to RS-232C port.
[RS-485], [USB]: No use.
[OFF], [DVI1],
[DVI2], [RS-232C],
[RS-485], [USB]
[DVI2], [RS-232C],
[RS-485], [USB]
[SERIAL
BAUDRATE]
BAUDRATE]
Select the serial baud rate according to the equipment
connected.
Note: This function is available when you set [EXT
BRILL CTRL] to [RS-232C].
connected.
Note: This function is available when you set [EXT
BRILL CTRL] to [RS-232C].
[4800bps],
[9600bps],
[19200bps],
[38400bps]
[9600bps],
[19200bps],
[38400bps]
[COLOR
CALIBRATION]
CALIBRATION]
Select whether to use color-adjusted correction data or
not.
[OFF]: Do not use the adjusted data.
[ON]: Use the adjusted data.
not.
[OFF]: Do not use the adjusted data.
[ON]: Use the adjusted data.
[OFF], [ON]
[KEY LOCK]
Select whether to lock the key operation or not (see
paragraph 3.2.2).
[OFF]: Do not lock the key operation.
[ON]: Lock the key operation.
paragraph 3.2.2).
[OFF]: Do not lock the key operation.
[ON]: Lock the key operation.
[OFF], [ON]
[SAVE AND EXIT]
Select whether to save the settings or not.
[NO]: Cancel the settings.
[YES]: Save the settings.
[NO]: Cancel the settings.
[YES]: Save the settings.
[NO], [YES]
INSTALLATION SETTING
EXT BRILL CTRL
SERIAL BAUDRATE
COLOR CALIBRATION
KEY LOCK
SERIAL BAUDRATE
COLOR CALIBRATION
KEY LOCK
SAVE AND EXIT
RS-232C
9600bps
9600bps
ON
ON
ON
YES
(OFF/DVI1/DVI2/RS-232C/RS-485/USB)
(4800/9600/19200/38400)
(OFF/ON)
(OFF/ON)
(4800/9600/19200/38400)
(OFF/ON)
(OFF/ON)
(NO/YES)
Save configuration changes and exit now? YES[
] NO[]