Hanns.G HL190/HL199 User Manual

                                                                                                                                        User’s Manual   

DISSEMBLING THE STAND BASE: 
 
1.  Disconnect all the cables and cords from the Monitor to prevent breakage. 
2.  Carefully place the Monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to 

prevent any damage to the Monitor. 

3.  Remove the 5 screws. 
4.  Gently remove the stand base. 
 

 

 

 

(For reference only) 

 
WALL MOUNTING THE MONITOR: 

 

1.  Purchase a VESA compatible wall bracket: 

VESA 100×100, 4 holes, M4, 10mm, 8kg. 

2.  Locate your ideal Monitor position on the wall.   
3.  Fix the wall bracket firmly on the wall. 
4.  Secure the Monitor to the bracket using the 4 mount holes on   

the back and center of the Monitor. 

 

•  Please read the instructions of your specific wall bracket to properly wall mount the Monitor. 

•  The pitch of the mounting holes is 100mm horizontally and 100mm vertically. 

•  The screws type required is metric: M4, 10mm length. 

•  The Monitor stand base can be screwed on a table or a hard surface using the hole on the back of 

the stand base. 

•  For use only with UL listed wall mount bracket. 
 

 

9