Aiphone KB-MV3 User Manual
3A2 3A1 2A2 2A1 1A2 1A1
3A2 3A1 2A2 2A1 1A2 1A1
INSTALLATION DIAGRAM:
KB-MV2
Rear View
U
P
P
KB-SWM & KB-SWS
Rear View
Installation:
-
-
Mount the KB-SWM and KB-SWS into the GF-2F or GF-3F mounting bracket.
-
Plug the KB-MV2 / KB-MV3 connector cable into the KB-SWM. If any KB-SWS sub-modules are used, plug the
KB-MV2 / KB-MV3 connector cable into the closest one, then plug its blue and yellow 10-pin connector into the next
switch module, daisy-chaining them together. Plug the last KB-SWS connector into the KB-SWM master switch module.
KB-MV2 / KB-MV3 connector cable into the closest one, then plug its blue and yellow 10-pin connector into the next
switch module, daisy-chaining them together. Plug the last KB-SWS connector into the KB-SWM master switch module.
-
Connect the black and white wire from the KB-MV2 / KB-MV3 connector cable to the SKK-620 power leads (cut spade
lug connectors). The white wire connects to +6VDC (black w/white stripe), and the black wire to -6VDC (solid black).
lug connectors). The white wire connects to +6VDC (black w/white stripe), and the black wire to -6VDC (solid black).
-
Connect wires from KB-3MRD’s to corresponding terminals on the KB-SWM / KB-SWS. (1A1, 1A2 = upper button,
2A1, 2A2 = middle button, 3A1, 3A2 = lower button)
2A1, 2A2 = middle button, 3A1, 3A2 = lower button)
-
Install completed entry panel into either the GF-2B / GF-3B (semi-flush mount) or GF-nHB (surface mount) as required.
-
Use Aiphone series wire 871802. Wire must be 18AWG solid, non-shielded, PE insulation.
Initialization:
-
-
The entrance panel must be powered on prior to powering the
tenant stations.
tenant stations.
-
After the entrance and tenant stations are powered on, initialize
the system by calling each tenant from each entry panel.
the system by calling each tenant from each entry panel.
KB-SWM
KB-SWS
NOT USED
WHITE
BLACK
To + 6VDC
To - 6VDC
To KB-3MRD
To KB-3MRD
To KB-3MRD
To KB-3MRD
To KB-3MRD
To KB-3MRD
GF-2F
(frame & bracket)
GF-3F
(frame & bracket)
KB-SWM & KB-SWS’s
mounted in bracket
Page 2
Not Used
1A1, 1A2
2A1, 2A2
3A1, 3A2