Panasonic RQT7114-2Y User Manual

RQT7114

TURNTABLE : A mode for DJ play, all functions are useable.

•Panel data (

 page 19) set on this unit is memorized on this

unit.

•When using CD-R, CD-RW MP3 files, the total number of tracks

and total album number are not displayed. Confirm by switch-
ing to the CD PLAYER mode.

The mode best suited for play as an audio player.
You can use DJ play functions excluding the following limited func-
tions.
Limited functions

•Panel data cannot be automatically stored or read.
•The platter does not rotate. The platter slip surface cannot be

operated.

•The auto cue and cue bank functions do not work.
•The instant change function does not work.

•The RESET lamp comes on and returns to normal play speed.
•DJ play functions like dynamic effect and so on are automati-

cally switched off.

Basic play operation (

 page 12-13) changes

•In step 2, switch to the CD PLAYER side.
•In step 5, press [PLAY/PAUSE]

and play of the first track begins,
and once the end of track is
reached the PLAY/PAUSE lamp
goes out and play stops.
Display indicator when stopped
When using CD, SD Audio:
Total play time is displayed.
When using CD-R, CD-RW MP3 files:
The total number of tracks and
total number of albums are dis-
played.

•To start play

Press [PLAY/PAUSE].

•To stop play

Press [CUE STOP].

•To eject the CD

During play, you can also press the CD eject button to eject the
disc.

You can select to use the unit as a turntable, or as a CD player.

Total play time
(Hours, Minutes, Seconds)

Total number
of tracks

Total number

of albums

When in the TURNTABLE mode and Instant Change is off, the sound
when starting and pausing is synchronized with the starting and stop-
ping of the platter. When Instant Change is on, just like pressing [PLAY/
PAUSE] on a normal CD player, play is paused or starts instantly.
This is a feature specific to digital turntables.

•The INSTANT CHANGE lamp lights.

•Pressing [INSTANT CHANGE] again will cancel the setting.
•The Instant Change on or off setting for each CD or SD Memory

Card is stored to memory, and the setting is restored once the set
media is re-inserted.

•The platter drive motor stops. When play-

ing, the platter comes to a gradual stop,
and the sound playing is synchronized to
the platters movement.

•The strobo illuminator light goes out, and

the FREE WHEEL indicator flashes in the
display.

•You can press [PUSH] again to release.
•Turning the power off will erase the settings.

FREE WHEEL indicator

While in TURNTABLE mode, you can adjust the brake speed for the
platter to come to a stop by pressing [PLAY/PAUSE] during play.

S (Slow) direction : Slow stop
F (Fast) direction : Fast stop

When the Auto Cue function is on (

 page 12), depending on the

track, the auto cue point may not be set at the point just before where
the audio begins. In this situation you can adjust the auto cue level.

•“LEVEL –60 dB” appears in the display (initial settings example).

•Select from –36 dB, –42dB, –48 dB, –54 dB, –60 dB, –66 dB,

–72 dB, –78 dB

•Sound that is lower than the set level is skipped as null sound.

•The selection is automatically set if you do not press [•DISPLAY

ANGLE –FUNCTION] within 5 seconds.

•The set auto cue level for each CD or SD Memory Card is stored

to memory, and the setting is restored once the set media is re-
inserted.