Panasonic RQT7114-2Y User Manual

Page of 28
RQT7114
27
Reference
Error messages
Message
CAN NOT EJECT
CUE BANK ERROR
DATA ERROR
FAILED
FILE SELECT ERROR
FORMAT ERROR
NO CD AUDIO TRACK
NO DATA
NO DISC
NO PANEL MODE
NO REMAIN
NO SD AUDIO TRACK
NO SD CARD
REPLACED OLD PANEL DATA
SD CARD FULL
SD CARD PROTECTED
SD LID OPEN
TRACK ERROR
Description
Cannot eject the CD.
After setting the auto cue point, you tried to set
the cue setting without selecting the cue bank.
There is a problem with the data.
A save, load or format error occurred and the op-
eration did not complete.
The wrong file was selected.
You cannot format this SD Memory Card.
The inserted disc is unrecognizable.
The disc has been inserted upside down.
You tried to save to a SD Memory Card, but there
is no sample pad data.
CD is not inserted.
You cannot save panel data when using the CD
PLAYER mode.
You cannot display the current remaining time with
MP3 files.
There are no audio tracks on this SD Memory Card.
The inserted SD Memory Card is unrecognizable
because of damage or an error.
SD Memory Card is not inserted.
The oldest used media panel data was replaced.
You cannot store more than 50 CDs or SD Memory
Cards worth of data items.
You cannot save any more data to the SD Memory
Card.
The SD Memory Card is write protected.
The lid of the SD Memory Card slot is open.
You cannot play this track.
This track data cannot be read.
Action
Pause the unit and eject the CD.
Select the cue bank first.
Use a SD Memory Card that was recorded
properly.
Try saving or loading again. Or try saving to a
new SD Memory Card.
Select the correct file.
Use a new SD Memory Card.
Re-insert the CD properly.
Re-insert the CD properly.
Save using the TURNTABLE mode.
Use a SD Memory Card that was recorded
properly.
Re-insert the SD Memory Card properly.
Save it to a SD Memory Card or initialize the
unit’s memory.
Use a new SD Memory Card.
Release the SD Memory Card write-protect
switch.
Make sure to close the lid.
Select another track or replace with properly
recorded media.
Specifications
To clean this unit, wipe with a soft, dry cloth.
Never use alcohol, paint thinner, or benzine to clean this unit.
Before using chemically treated cloth, read the instructions that came with the cloth carefully.
Maintenance
•Digital audio output
Coaxial digital output
Pin jack
•Headphone
Output level
20 mW max. 32 
Ω (adjustable)
•Pickup
Wave length
790 nm
Laser Power
No hazardous radiation is emitted
•General
Power supply
AC 120 V, 60 Hz
Power consumption
20 W
Dimensions (W 
X
 H 
X
 D)
320 x 111 x 330 mm
(12
39
/
64
˝ x 4
3
/
8
˝ x 13˝)
Mass
5.8 kg
(12.8 lb.)
Note
Specifications are subject to change without notice.
Mass and dimensions are approximate.
Specifications are the values when playing CD audio in the CD
PLAYER mode with tempo reset.
•Playable media
CD (12 cm) (5˝)
CD-Audio (CD-DA)
CD-R/CD-RW (CD-DA, MP3)
SD Memory Card
•CD-MP3 play format
Compatible compression rate
between 32 kbps and 192 kbps
(Recommended: 128 kbps)
Compatible sampling rate
48 kHz/44.1 kHz/32 kHz
•SD Audio play format
Audio extension format
MPEG2-AAC/MP3
Compatible sampling rate
48 kHz/44.1 kHz/32 kHz
•Audio
No. of channels
2 (stereo)
Frequency response
4 Hz-20 kHz
Output voltage
2 Vrms (0 dB) (JEITA)
Output terminal
Pin jack