Tanaka ECV-4501 User Manual
www.tanakapowerequipment.com 20 custsvc@tanaka-ism.com
Owner’s Manual
ECV-4501
IMPORTANT NOTICE
THIS INFORMATION IS FOR THE US AND CANADIAN MARKETS ONLY.
Only use replacement bars and chains specified by the manufacturer other equivalent.(See the chart below)
Bar & Chain USA and Bar & Chain CANADA
LOW KICKBACK BAR AND CHAIN COMBINATIONS FOR USA
Low-Kickback saw chain is chain which has met the kickback performance requirements of
ANSI Bl 75.1 -199 1. (American National Standard for Power Tools-Gasoline Powered Chain Saws-Safety
Requirements) when tested on the representative sample of chain saws below 3.8 c.i.d. specified in ANSI
B175.1-1991.
WARNING!
Use of other non-listed Bar/Chain combinations may increase kickback forces and increase the risk of kickback
injury.
To reduce the possibility of kickback, it is important to use the correct bar and chain combinations. Following is
a list of recommended combinations for Tanaka saws, ECV-4501. These power head, bar and chain
combinations have been investigated in accordance with the ANSI Bl 75.1-1991 standards.
Only use replacement bars and chains specified by the manufacturer other equivalent.(See the chart below)
Bar & Chain USA and Bar & Chain CANADA
LOW KICKBACK BAR AND CHAIN COMBINATIONS FOR USA
Low-Kickback saw chain is chain which has met the kickback performance requirements of
ANSI Bl 75.1 -199 1. (American National Standard for Power Tools-Gasoline Powered Chain Saws-Safety
Requirements) when tested on the representative sample of chain saws below 3.8 c.i.d. specified in ANSI
B175.1-1991.
WARNING!
Use of other non-listed Bar/Chain combinations may increase kickback forces and increase the risk of kickback
injury.
To reduce the possibility of kickback, it is important to use the correct bar and chain combinations. Following is
a list of recommended combinations for Tanaka saws, ECV-4501. These power head, bar and chain
combinations have been investigated in accordance with the ANSI Bl 75.1-1991 standards.
MODEL NUMBER
BAR NUMBER
LENGTH-TYPE CHAIN
NUMBER
ECV-4501 180PXBK041 18”-DG 33SL072X
200PXBK041
20”-DG
33SL078X
DG-DOUBLE GUARDTM(is registered trademark of OMARK industries) ... Reversible reduced kickback-bar.