Echo CS-530 User Manual

30

• Inspect and adjust every part of the chain saw.

- Completely clean every part and repair if

necessary.

- Apply thin coating of oil on metal parts to

prevent rust.

• Remove chain and guide bar.
• Drain fuel tank, pull starter slowly a few times to

drain fuel from carburetor.

• Pour a small amount of clean motor oil into spark

plug hole, pull starter and crank the engine until
piston reaches: TOP DEAD CENTER.

• Store in a dry area, free from dust.

• For future reference, you should keep this

Instruction manual and the Safety manual.

• If this Instruction manual or the Safety manual

has become illegible or is lost, please purchase
a new one from your ECHO dealer.

Dimension

L × W × H

mm

400 × 252 × 278  (15.7 in. × 9.9 in. × 10.9 in.)

Mass

Power head, dry

kg

5.1 (11.2 lb.) Without chain and guide bar

Engine

Type

Air-cooled two-stroke single cylinder

Displacement

mL (cm³)

50.1 (3.057 cu. in.)

Carburetor

Diaphragm type

Magneto

Flywheel magneto: CDI system

Spark plug

NGK BPM8Y

Starter

Recoil starter

Power transmission

Automatic centrifugal clutch

Fuel

Mixture ratio

50 : 1 ratio with ECHO Power Blend X™, ISO-L-EGD
(ISO/CD 13738), JASO M345-FC/FD  two- stroke,
air-cooled engine oil.

Gasoline

Use 89 octane unleaded.
Do not use fuel containing methyl alcohol, more than
10 % ethyl alcohol or 15 % MTBE.
Do not use alternative fuels such as E-20 or E-85.

Tank capacity

L

0.60 (20.3 US. fl. oz.)

Oil

Bar and chain

ECHO bar and chain oil (or motor oil)

Tank capacity

L

0.28 (9.5 US. fl. oz.)

Guide bar and

See page 22 for Chain and Guide Bar Combination

saw chain

Lubrication

Adjustable automatic oil pump

Engine speed

Idle

r/min

2800

Clutch engagement

r/min

3800

Wide open throttle

r/min

13500

Standard

Front hand guard, Rear hand guard,

features

Anti-vibration device, Spiked bumper,
Throttle control lockout, Chain brake,
Chain catcher, Spark arrestor muffler, Kick guard

* Technical data subject to change without notice.