Homelite UT10588 User Manual

Make sure the on/stop switch is in the  
STOP “ 

 ” position and the chain has stopped 

before performing any maintenance on the saw.  
Failure to do so may result in serious personal 
injuries.

Muffler surfaces are very hot during and after 
operation of the chain saw; keep all body parts 
away from the muffler. Serious burns may occur 
if contact is made with the muffler.

When servicing, use only identical Homelite 
replacement parts. Use of any other parts may 
create a hazard or cause product damage.

Aways wear eye protection with side shields 
marked to comply with ANSI Z87.1, along with 
hearing and head protection.  Failure to do so 
could result in objects being thrown into your 
eyes and other possible serious injuries.

Avoid using solvents when cleaning plastic parts. 
Most plastics are susceptible to damage from 
various types of commercial solvents and may be 
damaged by their use. Use clean cloths to remove 
dirt, dust, lubricant, grease, etc.

Do not at any time let brake fluids, gas-
oline, petroleum-based products, pene-
trating oils, etc., come in contact with 
plastic parts. Chemicals can damage, weaken or 
destroy plastic which may result in serious 
personal injury.

Fig. 34

Fig. 35

Fig. 36

All of the bearings in this product are lubricated with 
a sufficient amount of high grade lubricant for the 
life of the unit under normal operating conditions. 
Therefore, no further lubrication is required.