Homelite UT10582 User Manual



 Remove  the  screws  and  cylinder  cover  as 

described previously. 



 Clean the cylinder fins.



 Lift the chain brake over the post.



 Lay the chain saw on its side with the bar and 

chain on the ground.



 Remove the chain oil and fuel caps.



 Remove the three screws that hold the starter 

housing in place.



 Lift off the starter cover and set aside.



 Replace chain oil and fuel caps to prevent con-

tamination during cleaning.



 Clean the flywheel fins.



 Remove the chain oil and fuel caps.



 Replace the starter housing. Reinstall screws 

and secure.



 Replace the chain oil and fuel caps.



 Replace the cylinder cover. Reinstall screws and 

secure.



 Replace the chain brake on the post.

  NOTE: Check to ensure that the air filter is in the 

proper position before reinstalling the cylinder 
cover.

NOTE:  If you notice a power loss with the gas-

powered tool, the exhaust port and muffler may 
be blocked with carbon deposits. These deposits 
may need to be removed to restore performance. 
We highly recommend that only qualified service 
technicians perform this service.

Fig. 66

Fig. 68

Fig. 67