Jonsered CS 2141 EPA II User Manual

English

 – 33

1

Check that the vibration damping elements are not 
damaged.

2

Lubricate the clutch drum bearing.

3

File off any burrs from the edges of the bar.

4

Clean the spark plug. Check that the electrode gap is 0.5 
mm (0,020 inch).

5

Clean the fins on the flywheel. Check the starter and the 
recoil spring.

6

Clean the cooling fins on the cylinder.

7

Clean or replace the spark arrestor mesh in the muffler.

8

Clean the carburettor compartment.

1

Check the brake band on the chain brake for wear.

2

Check the clutch centre, clutch drum and clutch spring for 
wear.

3

Clean the outside of the carburettor.

4

Change the fuel filter in fuel tank.

5

Clean the inside of the fuel tank.

6

Clean the inside of the oil tank.

7

Check all cables and connections.

8

Change the spark plug.

9

Change the air filter.

0,5 mm

0,5 mm