Land Pride RCF2760 and RCF2772 User Manual
11
Section 1: Assembly & Set-up
12/15/15
RCF2760 and RCF2772 Rotary Cutters 326-460M
3-Point Hitch Pin Configuration For Cat. l Hitch
Figure 1-6
3-Point Hitch Pin Configuration For Cat. ll Hitch And
Quick Hitch Pin Configuration For Cat. l & ll Hitches
Figure 1-7
4.
Connect top center 3-Point link to upper pivot hitch:
a. Cat. l Hitch: Connect center link with clevis
pin (#8) and hairpin cotter (#7).
b. Cat. ll Hitch: Connect center link with clevis
pin (#8), pivot tube (#2), and hairpin cotter (#7).
5.
The length of the top center link will be adjusted later
after the tail wheel has been installed.
after the tail wheel has been installed.
6.
The arm lift cylinders on your tractor’s 3- point hitch
should be adjusted to allow for lateral float. Please
consult your tractor’s manual for adjusting
instructions.
should be adjusted to allow for lateral float. Please
consult your tractor’s manual for adjusting
instructions.
35391
Hitch Pins
Hairpin Cotters
In Holes “A”
In Holes “A”
1-3
35391
Hairpin Cotters
In Holes “B”
In Holes “B”
Hitch Pins
1-4
Tractor Hook-Up
Refer to Figure 1-5:
!
DANGER
A 3-Point Category I or Category II hitch is required. The
lower 3-Point arms of the 3-Point hitch must be stabilized
to prevent side-to-side movement. Most tractors have
sway blocks or adjustable chains for this purpose.
lower 3-Point arms of the 3-Point hitch must be stabilized
to prevent side-to-side movement. Most tractors have
sway blocks or adjustable chains for this purpose.
1.
Slowly back tractor up to Rotary Cutter while using
tractor’s 3-Point hydraulic control to align lower
3-Point arm holes with clevis lug holes “C”.
tractor’s 3-Point hydraulic control to align lower
3-Point arm holes with clevis lug holes “C”.
2.
Engage tractor park brake, shut tractor engine off,
and remove key before dismounting from tractor.
and remove key before dismounting from tractor.
3.
Attach lower arms to clevises with hitch pins (#9) and
secure with hairpin cotters (#6) as follows:
secure with hairpin cotters (#6) as follows:
a. Cat. l 3-Point Hitch: Insert hairpin cotters (#6) in
hole “A”.
b. Cat. ll 3-Point Hitch and Cat. l & ll Quick Hitch:
Insert hairpin cotters (#6) in hole “B”.
c. See also Figure 1-6 & Figure 1-7 for illustration of
hitch pin positions in clevis.
NOTE: Land Pride’s Quick Hitch can be attached to
the tractor to provide quick and easy 3-point hook-
up and detachment. See your nearest Land Pride
dealer to purchase a Quick-Hitch.
the tractor to provide quick and easy 3-point hook-
up and detachment. See your nearest Land Pride
dealer to purchase a Quick-Hitch.
Tractor Hook-Up
Figure 1-5
35397
37298