Land Pride RCF2784 User Manual
9
Section 1: Assembly & Set-up
12/15/15
RCF2784 Rotary Cutters 326-364M
5.
Bolt long rear braces (#11) together with
5/8"-11 x 1 1/2" GR5 cap screw (#15) and hex lock
nut (#17). Tighten lock nut to the correct torque.
5/8"-11 x 1 1/2" GR5 cap screw (#15) and hex lock
nut (#17). Tighten lock nut to the correct torque.
6.
Insert 1" x 2" clevis pin (#7B) through rear holes in
short braces (#3) and secure with cotter pin (#8B).
Bend one or both legs of cotter pin around clevis pin
to retain cotter pin.
short braces (#3) and secure with cotter pin (#8B).
Bend one or both legs of cotter pin around clevis pin
to retain cotter pin.
7.
Attach long rear braces (#11) to short rear
braces (#3) by inserting 1" x 2" clevis pin (#7A)
through middle hole in short rear brace (#3), both
long rear braces (#11), middle hole of short rear
brace (#3), and flat washer (#9A). Secure clevis pin
with cotter pin (#8A). Bend one or both legs of cotter
pin around clevis pin to retain cotter pin.
braces (#3) by inserting 1" x 2" clevis pin (#7A)
through middle hole in short rear brace (#3), both
long rear braces (#11), middle hole of short rear
brace (#3), and flat washer (#9A). Secure clevis pin
with cotter pin (#8A). Bend one or both legs of cotter
pin around clevis pin to retain cotter pin.
8.
Rotate short rear braces (#3) around until clevis
pin (#7B) is above long rear braces (#11) as shown in
Detail-A.
pin (#7B) is above long rear braces (#11) as shown in
Detail-A.
9.
Attach short rear braces to right and left-hand hitch
straps by inserting clevis pin (#24) through hitch
strap (#10), flat washer (#9B), both short rear
braces (#3), flat washer (#9C), hitch strap (#6), and
flat washer (#9D). Secure clevis pin (#24) with cotter
pin (#8C). Bend one or both legs of cotter pin around
clevis pin to retain cotter pin.
straps by inserting clevis pin (#24) through hitch
strap (#10), flat washer (#9B), both short rear
braces (#3), flat washer (#9C), hitch strap (#6), and
flat washer (#9D). Secure clevis pin (#24) with cotter
pin (#8C). Bend one or both legs of cotter pin around
clevis pin to retain cotter pin.
10. Attach clevis pin (#26) to right and left-hand hitch
straps (#10 & #6) as shown. Secure clevis pin with
hairpin cotter (#23).
hairpin cotter (#23).
11. Attach hitch pins (#1) and 2 1/2" long adapter
bushings (#27) to 3-Point clevis as shown. Secure
hitch pins with linchpins (#25).
hitch pins with linchpins (#25).
Hitch Assembly
Figure 1-2
33261
3-Point Cutter Assembly & Set-up
The following instructions are for assembling the 3-Point
cutter. See page 14 for “Pull-Type Cutter Assembly &
Set-up” instructions.
cutter. See page 14 for “Pull-Type Cutter Assembly &
Set-up” instructions.
3-Point Hitch
!
WARNING
Refer to Figure 1-2:
1.
Attach right and left-hand hitch straps (#6 & #10) to
cutter deck with 7/8"-9 x 2 1/2" GR5 bolts (#16),
bushings (#4), 2 1/4" O.D. flat washers (#22), and
nylock hex nuts (#18). Tighten nylock nuts to the
correct torque.
cutter deck with 7/8"-9 x 2 1/2" GR5 bolts (#16),
bushings (#4), 2 1/4" O.D. flat washers (#22), and
nylock hex nuts (#18). Tighten nylock nuts to the
correct torque.
2.
Attach driveline hook (#12) to hitch strap (#6) using 5/
16"-18 x 1 1/4" bolt (#28) and nut (# 29).
16"-18 x 1 1/4" bolt (#28) and nut (# 29).
3.
Bolt left and right-hand hitch straps together with
1"-8 x 4 1/2" GR5 cap screw (#14), bushing (#2), and
hex flange lock nut (#19). Tighten lock nut to the
correct torque.
1"-8 x 4 1/2" GR5 cap screw (#14), bushing (#2), and
hex flange lock nut (#19). Tighten lock nut to the
correct torque.
4.
Attach long rear braces (#11) to rear deck lugs in the
holes shown with 5/8"-11 x 1 3/4" GR5 hex head cap
screws (#13), bushings (#5), flat washers (#21), and
hex flange lock nuts (#20). Tighten lock nuts to the
correct torque.
holes shown with 5/8"-11 x 1 3/4" GR5 hex head cap
screws (#13), bushings (#5), flat washers (#21), and
hex flange lock nuts (#20). Tighten lock nuts to the
correct torque.