Clarion MAX667VD User Manual

MAX667VD

1. Press the [

7] (OPEN/CLOSE) button.

The operation panel will be opened or closed.

Note:
• The operation panel will close automatically when 

• When the operation panel is open, the touch panel 

The angle of the operation panel can be adjusted 
in the range of 0° to 30°.
1. Keep pressing the [

7] (OPEN/CLOSE) button 

more than 2 seconds.
Beeps will sound twice and the operation 
panel will start moving.

2. When the operation panel is moved to your 

desired angle, release the button.
The operation panel will stop.

* Once you adjust the angle of the operation 

panel, the operation panel will return to the 
adjusted angle even after it is open/closed.

1. Keep pressing the [

7] (OPEN/CLOSE) 

button.
It will move, and stop at 30°.

2. Keep pressing the [

7] (OPEN/CLOSE) button 

again.
It will move, and stop at 0°.

Note:
• When the optional 5.1 ch Surround Decoder 

1. Press the [ADJ] button, then touch the 

[AUDIO] key.

2. Touch the item key to adjust.
3. Perform the adjustment.

See the following sections for detail.

4. Touch the [Back] key to return to the previous 

screen.

* In the following sections, only the details 

regarding adjustments are described, 
procedures to select items are skipped.

2-1. Touch the [

]] key of the BAL/FAD item.

3-1. Touch the [

{] or [}] key to adjust to the 

fader level.

* The factory default setting is “0”. (Adjustment 

range: front 12 to rear 12)

[

{] : 

Emphasizes the sound from the front 
speakers.

[

}] : 

Emphasizes the sound from the rear 
speakers.

3-2. Touch the [

[] or []] key to adjust to the 

balance level.

* The factory default setting is “0”. (Adjustment 

range: left 13 to right 13)

[

[] : 

Emphasizes the sound from the left 
speakers.

[

]] : 

Emphasizes the sound from the right 
speakers.

280QZ6070KA-00.0_EN.book  Page 23  Monday, February 27, 2006  2:12 PM