Clarion DXZ385USB User Manual

DXZ385USB

 

● Setting the clock

2-1. Select “CLOCK”.

3-1. Press the [

] button

3-2. Press the [x] or [v] button to select the 

hour or the minute.

3-3. Press the [w] or [z] button to set the 

correct time.

∗

The clock is displayed in 12-hour format.

3-4. Press the [

] button to store the time into 

memory.

● Displaying the settings

The number of indicator of this unit decreases, 
you can see the state of current settings at any 
operation mode.

2-1. Select “SETTINGS”.

3-1. Press the [w] or [z] button to display the 

state of current settings.

∗

When the setting is selected, after 1 second 
the current state will be displayed.

● Turning the screen saver function on 

This unit is provided with the screen saver 
function which allows you to show various kinds 
of patterns and characters in the operation 
status indication area of the display in a random 
order. You can turn on or off this function. If the 
button operation is performed with the screen 
saver function on, the operation display 
corresponding to the button operation is shown 
for about 30 seconds and the display returns to 
the screen saver display.

∗

The factory default setting is “ON”.

2-1. Select “SCRN SVR”.

3-1. Press the [w] or [z] button to select the 

setting.

Each time you press the [w] or [z] button, 
the setting changes in the following order:

“MESSAGE” ↔ “ON” ↔ “OFF”

1. Press and hold the [DISP] button for 1 

second or longer to switch to the 
adjustment selection display.

2. Press the [x] or [v] button to select 

the “item name”.

“CLOCK” ↔ “SETTINGS” ↔ “SCRN SVR” 
↔ “MSG INP” ↔ “SCROLL” ↔ “DIMMER” 
↔ “A-CANCEL” ↔ “TEL-SP” ↔ “TEL-
SW

” ↔ “S-CHECK”

3. Press the [w] or [z] button to select the 

“desired setting value”.

∗

In the case of display blinking “ENT”, you 
can press the [

] button to adjust the 

setting value.

∗

After completing settings, press the [DISP] 
button to return to the previous mode.

or

  For example:   

after 1 second,