Bolens 460 Series Service Manual

Page of 36
3
1
Safety  
Labels
WARNING
DO NOT remove safety 
(or any) labels from 
chipper shredder for 
any reason. 
Safety Labels Found On Your 
Chipper Shredder
DO NOT OPERATE THIS MACHINE 
UNLESS THE CHUTE DEFLECTOR 
HAS BEEN PROPERLY INSTALLED.
WARNING
• Do not transport machine while 
   engine is running.
• Shredder should not be towed on any 
   street, highway or public road.
•  Do not tow shredder over 10 m.p.h.
• Do not allow anyone to sit or ride on 
   shredder.
• Do not tow shredder for long distances.
• Before towing, be certain the shredder
   is correctly attached to towing vehicle.
S30
DANGER
TO AVOID SERIOUS INJURY:
• Read the owner's manual(s) before starting and 
using unit.
• Keep all shields and guards in place and securely
attached.
• Keep hands, feet, face, clothing and long hair out of
Shredder Hopper, Chipper Chute and Discharge
Chute while the engine is running. Rotating cutting
blades inside these openings will cause serious
personal injury if contacted. Material being 
processed
may bounce back from inlet openings or be thrown
from the discharge chute. Long hair or loose clothing
may be pulled sucked into the inlet openings.
• Do not place branches over 1/ inch diameter into
the large Shredder Hopper. Branches over 1/ inch in
diameter should be placed in the Small Chipper
Chute.
• If the chipped shredder jams or becomes clogged,
immediately shut off the engine and wait for all
moving parts to come to a complete stop before
clearing.
• Do not install remove, adjust, or service the
discharge screen or any other part while the engine
is running. Blade contact can occur.
DANGER
TO AVOID SERIOUS INJURY:
• Do not operate on uneven ground where unit is
unstable. Do not operate on pavement, gravel or
other hard surfaces since objects can ricochet
and cause injury.
• To avoid a fire hazard, keep leaves, grass, and other
combustible materials away from hot engine and 
muffler.
• Keep children and others away from area of
operation.
• Wear approved safety glasses, gloves and ear 
protection.
INSTRUCTIONS:
TO RAISE AND LOWER HOPPER
TO AVOID
EYE INJURY,
WEAR SAFTEY
GLASSES.
DO NOT DEPOSIT 
MATERIAL LARGER THAN 
1/" DIAMETER IN LARGE 
SHREDDER HOPPER.
THIS MAY DAMAGE 
MACHINE.
WARNING
DANGER
• ROTATING CUTTING BLADES.KEEP HANDS 
AND FEET OUT OF OPENING WHILE 
MACHINE IS RUNNING. 
• DO NOT OPERATE THIS MACHINE UNLESS 
THE CHUTE DEFLECTOR HAS BEEN 
PROPERLY INSTALLED AND IS  SECURED 
WITH THE HAND KNOBS.