Bolens 460 Series Service Manual

7.  The chipper shredder was shipped with one end of 

the support brace already secured to the lower frame. 
Loosen but do not remove the bolts securing the brace 
to the frame. See Figure 3-7.

  a. Align the holes in the chute with the holes in the top 

of the brace and attach brace to chipper chute with 
hardware previously removed. Tighten securely.

  b. Tighten the bolts securing the support brace to the 

frame.

  c.  Tighten the three nuts on the weld studs holding 

the chipper chute to the impeller housing.

8.  a. Remove the three cupped washers and hex nuts 

from weld studs around the opening on the side of 
the impeller housing. See Figure 3-8. 

A

B

C

NOTE: All references 
in this manual to the 
left or right side of 
the chipper shredder 
is from the operating 
position only. Excep-
tions, if any, will be 
specified.

This unit is shipped 

without gasoline or 

oil in the engine. Be 

certain to service 

engine with gasoline 

and oil as instructed 

in the separate engine 

manual before operat-

ing your machine.

NOTE: This Operators 
Manual covers a range 
of product specifica-
tions for various 
models. Characteristics 
and features discussed 
and/or illustrated in this 
manual may not be ap-
plicable to all models. 
MTD LLC reserves the 
right to change product 
specifications, designs 
and equipment without 
notice and without 
incurring obligation.