Panasonic PTO 540 RPM User Manual

Page of 12
 
WORK AREA 
 Keep everyone — especially children — away from the area of operation. 
Anyone who has not read this manual and received instructions from a 
qualified person should not be in the area.
   
 Provided labels on the unit advise the user of proper hitch dimensions and 
maximum safe operating speed. Check that proper danger labels are supplied with 
the drive-line (replacements are available from your drive-line supplier). Provide 
easy-to-understand instructions for proper drive-line operation, maintenance and 
repair in the operator’s manual. 
 
 
PERSONAL SAFETY 
 Stay alert, watch what you are doing and use common sense when operating a 
chipper. Do not use a chipper while you are tired or under the influence of 
drugs, alcohol or medication. 
A moment of inattention while operating a chipper 
may result in serious personal injury. 
 Do not attempt to operate the chipper until you have read and understood the 
owner’s manual. 
 Always keep the guards and chip deflector installed properly while operating 
the chipper.   
 Keep the decals in place and in good repair. The factory or your dealer will furnish 
new decals upon request. 
 Keep hair, hands, feet and other extremities out of and away from the hopper. 
Make sure there are no loose ends or strings to be caught by the machine. 
  Point the discharge chute away from doorways, sidewalks, or any areas where 
your view is obstructed. The chute should be pointed downwind when possible or the 
fines will blow into your eyes and down your neck. 
 WEAR PROTECTIVE GEAR: 
  EYES — Wraparound ANSI-approved safety glasses. 
  EARS — Ear plugs 
  HANDS — Leather gloves 
  FEET — Steel-toed boots 
  LEGS — Heavy pants 
  ARMS — Long-sleeved shirt 
 Always use the appropriate eye and ear protection and other safety equipment.   
Safety equipment such as dust mask, non-skid safety shoes and a hardhat used for 
appropriate conditions will reduce personal injuries. 
 Avoid accidental starting. Disconnect chipper from PTO when not in use, and when 
moving chipper to another work area.