Ryobi RY08554 User Manual

9

This product requires assembly.


  Carefully remove the product and any accessories from 

the box. Make sure that all items listed in the packing list 
are included.



  Inspect the product carefully to make sure no breakage 

or damage occurred during shipping.



  Do not discard the packing material until you have care-

fully inspected and satisfactorily operated the product.



  If  any  parts  are  damaged  or  missing,  please  call 

1-800-860-4050 for assistance.

Blower
Upper Blower Tube
Sweeper Nozzle
High Velocity Nozzle
Vacuum Handle
Vacuum Handle Knobs ()
Grounding Wire
Upper and Lower Vacuum Tubes
Vacuum Tube Screws ()
Vacuum Bag Assembly
Vacuum Bag Adaptor
-Cycle Engine Lubricant
Operator’s Manual
NOTE: Read and remove all hang tags and store with your 
operator’s manual.

If any parts are damaged or missing do not operate this 
product until the parts are replaced. Failure to heed this 
warning could result in serious personal injury.

Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any 
such alteration or modification is misuse and could result 
in  a  hazardous  condition  leading  to  possible  serious 
personal injury.

To prevent accidental starting that could cause serious 
personal injury, always disconnect the engine spark plug 
wire from the spark plug when assembling parts.

See Figure 2.
  Align raised tabs on main housing to the slots on upper 

tube;  slide  together  and  tighten  securely  by  twisting. 

Check tightness after initial run and retighten if needed.

  To remove the tubes, rotate the tubes to unlock them and 

remove from the blower housing outlet.

Fig. 

Fig. 3

See Figure 3.
Before installing the vacuum handle, connect the grounding 
wire as shown. This will help prevent static shock when using 
the vacuum in low humidity conditions.