Shindaiwa 68907-94311 User Manual
6
Assembling the Blower
Danger from rotating impeller!
Stop the engine before installing or
Stop the engine before installing or
removing the blower tubes! Never
perform any maintenance or assembly
procedures on this unit while the
engine is running!
perform any maintenance or assembly
procedures on this unit while the
engine is running!
Place.the.blower.upright.on.the.ground.or.
on.a.sturdy.work.surface.
1.. Grasp.the.blower.tube.as.shown,.and.
1.. Grasp.the.blower.tube.as.shown,.and.
push.the.tube.over.the.blower.discharge.
port.and.locking.pins.
.. Lock.the.blower.tube.to.the.blower.
discharge.port.by.rotating.the.tube.as.
shown.
IMPORTANT!
Blower tube installation affects both blow-
er balance and performance! The tube
and nozzle are correctly installed when
er balance and performance! The tube
and nozzle are correctly installed when
the mark “THIS SIDE UP” is visible to the
operator during normal operation.
operator during normal operation.
Blower
Tube
Locking Pin
Push the blower tube
over the discharge port
and locking pin
Rotate clockwise to lock
Nozzle
Locking Pin
Blower Tube
Push the nozzle
over the blower
tube and locking
pin
Rotate clockwise to lock
Mark
“THIS SIDE UP”
must face up
1
3
2
4
WARNING!
3.. Grasp.the.nozzle.with.the.mark.“THIS.
SIDE.UP”.positioned.as.shown,.and.
then.push.the.nozzle.over.the.straight.
tube.and.locking.pins.
4.. Lock.the.nozzle.to.the.straight.tube.by.
rotating.the.nozzle.as.shown.