Echo 11-Dec User Manual

Never perform maintenance or assembly procedures with engine 

running or serious personal injury may result.

 1.  Place guide loop (G) across clamp, and turn until clip fully engages 

clamp band.

Clamp with cable guide loop (G) fits elbow end of flexible pipe (B).

 2.  Assemble clamps (A) onto both ends of flexible pipe (B).

 

 3.  Assemble flexible pipe (B) to elbow (D) on blower. Position guide 

loop (G) on inside (blower side) of flexible tube and tighten clamp 

(A).

A light lubricant may be used to ease assembly of flexible pipe to 

blower elbow.

Hang handle freely from blower to assure throttle cable is not 

twisted before installing handle (E). 

 4.  Position cable between the elbow (D) and frame and along the top 

of the flexible pipe. Loosen knob (H) on handle (E). Align notch in 

handle with tabs (F). Install onto swivel pipe (C) past long ridges 

in pipe.

 5.  Assemble swivel pipe (C) into flexible pipe (B) and tighten clamp 

(A).

 

 6.  Clip throttle cable into throttle cable guide loop (G).

 7.  Move handle (E) to desired position. Tighten knob (H) hand tight. 

 8.  Assemble straight pipe (I) onto swivel pipe (C), until you feel light 

resistance. Do not force connection. Hold swivel pipe and turn 

straight pipe clockwise, engaging positive locking channels, until 

connection is firm. Do not force connection.

 9.  Assemble straight pipe with decal (J) to straight pipe (I) as in step 

8.

Blower use will eventually loosen pipe connections. Exclusive 

positive locking system allows pipes to be tightened. If loosening 

occurs, remove two straight pipes and install according to instruc-

tions 8 & 9.