Echo PB-2400 User Manual

Do not store your unit for a prolonged period of time (30 days or
longer) without performing protective storage maintenance which
includes the following:

1.

Store unit in a dry, dust free place, out of the reach of children.

Do not store in enclosure where fuel fumes may accumulate
or reach an open flame or spark or serious personal injury
may result.

2.

Place the ignition switch (A) in the "STOP" position.

3.

Remove accumulation of grease, oil, dirt and debris from exterior
of unit.

4.

Perform all periodic lubrication and services that  are required.

5.

Tighten all screws and nuts.

6.

Drain the fuel tank completely and pull the starter handle
several times to remove fuel from the carburetor.

7.

Remove the spark plug and pour 1/4 oz. (1/2 tablespoon) of
fresh, clean ECHO 2-stroke engine oil into the cylinder through
the spark plug hole.

A. Place a clean cloth over the spark plug hole.

B. Pull the recoil starter handle 2-3 times to distribute the oil

inside the engine.

C. Observe the piston location through the spark plug hole.

Pull the recoil handle slowly until the piston reaches the top
of its travel and leave it there.

8.

Install the spark plug (do not connect ignition cable).

9.

Remove blower pipe assembly from unit.