Husqvarna 115 149727 R01 User Manual

11

Remove plastic end caps from the center bag 

1. 

support arm. Fully insert spacer plug into the end 

of the support tube. It may be necessary to tap 

the spacer into place with a hammer or mallet. 

Replace the plastic end cap back over the spacer.

The additional extension will hold the hood more 

securely when latched.

ASSEMBLY

3½ Bolt

Weight Bracket

Weight Plate

1.  Bolt cast weight to weight brackets using

1¼ bolts and four nuts.

2.  Slide both weight brackets over the front tube on

the frame. Be sure to position the weight assembly 

in the center of the frame.

3.  Secure with 

-16 x 3½ bolts and four nuts.

Front Tube

NOTE: Assistance from another person may ease 

mounting the cover assembly to mower.

1.  Lift and rotate cover to align the cover brackets

with support assembly tubes.

2.  Slide the cover down over the support tubes until 

secure.

Remove center 

end cap

Insert spacer and 

replace cap