Husqvarna 115 149727 R01 User Manual

8

Remove the discharge chute from the deck. (Deck

1. 

configuration will vary by size and model)
Lower deck to the lowest cutting position.

2. 

To prevent interference with the new belt shield, 

3. 

reverse the bolt/nut assembly on the rear of the 

deck height adjustment plate.
Remove the right hand (discharge side) belt cover

4. 

from the deck.

ASSEMBLY

Outer Pulley Cover

Pin

Hairpin Cotter

Deck Height

Adjustment

Belt Cover

1.  Install the front mount bracket to the deck with the

pin and hairpin cotter supplied with the kit.

Discharge Chute

Reverse rear 

bolt/nut  

assembly

5.  Remove the bolt securing the right hand deck

pulley to the spindle.

6.  Replace right blade shaft with new, longer shaft. 

The existing drive pulley and key will fit on the new

shaft. Install blower drive pulley with the raised 

portion of pulley hub down. Slide spacer inside 

new pulley. Add key to new pulley.

7.  Remove two rear bolts from spindle and place belt 

shield standoff where the two bolts were removed. 

Replace bolts and tighten.

Drive Pulley

Key

Replacement Shaft

Belt Shield

Standoff

Spindle

New Heavy Washer

New Bolt

Spacer

8.  Use heavy washer and bolt supplied in kit to attach

pulley to spindle. Torque to 55-75 ft/lbs.

9.  Reinstall the deck belt.