Husqvarna 966004701 User Manual

11

1.  Position upper chute support against bagger inlet, 

flush at outer edges. See Illustration.

2.  Using support as a template, drill two 

3

/

8

 holes into 

bagger hood.

Upper Chute Support

Bagger Inlet

Nut

Bagger Hood

Flat Washers

Hex Bolt

Flex Trim

3.  Secure upper chute support to hood with hex 

bolts, washers and nyloc nuts.

ASSEMBLY

NOTE: Assistance from another person may ease 

mounting the cover assembly to mower.

1.  Lift and rotate cover to align the cover brackets

with support assembly tubes.

2.  Slide the cover down over the support tubes until 

secure.

Remove plastic end caps from the center two bag 

1. 

support arms. Fully insert spacer plugs into the 

ends of the support tubes. It may be necessary 

to tap the spacers into place with a hammer or 

mallet. Replace the plastic end cap back over the

spacer. The additional extension will hold the hood 

more securely when latched.

Remove center 

end caps

Insert spacers 

and replace caps