Ryobi Outdoor RY46501A User Manual

Page of 16
4
5
Do not use near underground electric cables, telephone 
lines, pipes, or hoses. If in doubt, contact your utility or 
telephone company to locate underground services.
Make sure your extension cord is in good condition. When 
using an extension cord, be sure to use one heavy enough 
to carry the current your product will draw. A wire gauge 
size (A.W.G.) of at least 14 is recommended for an exten-
sion cord 50 feet or less in length. A cord exceeding 100 
feet is not recommended. If in doubt, use the next heavier 
gauge. The smaller the gauge number, the heavier the 
cord. An undersized cord will cause a drop in line voltage 
resulting in loss of power and overheating.
Start the cultivator carefully according to instructions from 
a normal operating position and with feet well away from 
the tines.
If the unit strikes a foreign object, stop the motor, thor-
oughly inspect the machine for any damage, and repair 
the  damage  before  restarting  and  operating  the  ma-
chine. 
SPECIFIC SAFETY RULES
Never  leave  the  operating  position  when  the  motor  is 
running.
Unplug the unit before unclogging the tines and when 
making any repairs, adjustments, or inspections.
Do not overload the machine capacity by cultivating too 
deep in a single pass or at too fast a rate.
Be aware that the equipment may unexpectedly bounce 
upward or jump forward if the tines should strike buried 
obstacles such as large stones, roots, or stumps. 
Never operate the equipment on a slope.
Use extreme caution when pulling the machine towards 
you.
Save  these  instructions.  Refer  to  them  frequently  and 
use them to instruct others who may use this cultivator. If 
you loan someone this unit, loan them these instructions 
also.
WARNING:
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals 
known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to 
these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks 
that are specially designed to filter out microscopic particles.