3M 2273ME-iD User Manual
14
78-8130-6151-8-E
Press the left/right arrows [SK] to move the square
cursor to a digit. Press Select [SK] to enter the
number in the frequency field.
cursor to a digit. Press Select [SK] to enter the
number in the frequency field.
Press OK [5] to save the programmed frequency, or
press Exit [SK] to cancel. The frequency will appear
in the locate frequency screen as U ###.
press Exit [SK] to cancel. The frequency will appear
in the locate frequency screen as U ###.
Note: To redefine a previously programmed user
frequency, highlight the frequency, press enabl/
disabl, select the back arrow with the cursor, and
press select to delete the previous entry.
frequency, highlight the frequency, press enabl/
disabl, select the back arrow with the cursor, and
press select to delete the previous entry.
Filtering Power Frequency Interference
MENU [6] + More>>[SK] + Setup [SK] + + More» [SK] + More>>[SK] + Filter [SK]
In order to filter out unwanted power influences
while locating with user-defined frequencies, verify
the correct frequency is selected for your location
(default 50 Hz).
while locating with user-defined frequencies, verify
the correct frequency is selected for your location
(default 50 Hz).
Selecting Locating Audio
MENU [6] + More>>[SK] + Setup [SK] + + More» [SK] + More>>{SK} + Audio Config [SK]
The user can choose the audio response of the
receiver when using the Directional Peak mode for
path locating. Highlight the audio selection and press
OK
receiver when using the Directional Peak mode for
path locating. Highlight the audio selection and press
OK
to save.