Poulan GTT354 User Manual

5

:  For ease of assembly, you may wish to obtain the 

as sis tance of another person for mounting cover assembly 
to tractor.
1.    Position cover assembly on ground behind tractor.
2.      Lift and rotate cover to align cover brackets with support 

assembly tubes.

3.    Slide cover assembly down onto the support tubes.

03024

02543

Determine the correct support assembly for your tractor. 
The support assemblies are marked "A" and "B".

Compare the drawbar illustrations below to the drawbar 
located at the rear of your tractor.

Use the support assembly indicated for your tractor and 
discard the other support assembly.

 If you already have high lift bagging blades on your 

mower, store the supplied blades in a safe place for future 
use. Go on to step 2.
1.   Raise mower to highest position to allow access to 

blades.

2.    Remove blade bolts by turning counterclockwise.
3.   Install bagging blades supplied with stamped "THIS 

SIDE UP" facing up towards mower, or, blades stamped 
with "GRASS SIDE" facing down towards grass.

4.    Install and tighten blade bolts securely (45-55 Ft. Lbs. 

torque).

025

44

1.   Slide fl anges of support assembly into drawbar slots 

fi rst, then, pivot backwards inserting pin into drawbar 
pin hole.