Poulan GTT348 User Manual

5

Determine the correct support assembly for your tractor. 
The support assemblies are marked "A" and "B".

Compare the drawbar illustrations below to the drawbar 
located at the rear of your tractor.

Use the support assembly indicated for your tractor and 
discard the other support assembly.

NOTE:  For ease of assembly, you may wish to obtain the 
as sis tance of another person for mounting cover assembly 
to tractor.
1.    Position cover assembly on ground behind tractor.
2.      Lift and rotate cover to align cover brackets with support 

assembly tubes.

3.    Slide cover assembly down onto the support tubes.

03024

1.   Slide fl anges of support assembly into drawbar slots 

fi rst, then, pivot backwards inserting pin into drawbar 
pin hole.

secure with retainer spring. 

02543