Poulan 156239 User Manual

8

02092

020

86

1.    Rotate cover assembly onto its side as shown.
2.   Assemble support post to container support with 

the three (3) carriage bolts and locknuts. Tighten 
securely.

1.    Align mark on seal with mark at cover opening.
2.    Work seal into opening so cover sits between fl anges 

of seal.

NOTE:  For ease of assembly, you may wish to obtain the 
as sis tance of another person for mounting assembly to 
tractor.
1.   Raise seat on tractor to allow assembly to be 

mounted.

2.   With cover closed, lift assembly and place support 

post inside mounting bracket. Allow assembly to rest 
on lanced tabs of mounting bracket.

3.      Line up holes in mounting bracket with holes in support 

post and insert bracket support pin. Secure with retainer 
spring.

4.    Unlatch and open cover.
5.      Secure cover assembly to support tube using short hex 

bolt, long hex bolt, and locknuts as shown.  Tighten all 
hardware securely.

NOTE: Hardware securing support tube to drawbar must 
be tightened at this time.
6.   Install the four (4) tubing end caps onto container 

support.  Tap each end cap onto container support 
tubes to seat securely.

02090