Poulan 532140600 User Manual

Page of 17
13
4-1/4"
4"
1"
1"
CAUTION: BEFORE PROCEEDING WITH PREPARATION OF TRACTOR:
•      Depress clutch/brake pedal fully and set parking brake.
•      Place gearshift/motion control lever in neutral (N) position.
•      Place attachment clutch in "DISENGAGED" position.
•      Turn ignition key "OFF" and remove key.
•      Make sure the blade and all moving parts have completely stopped.
•      Disconnect spark plug wire from spark plug and place wire where it cannot come in contact 
with plug.
NOTE
ON SOME  MODEL TRACTORS, MINOR MODIFICATIONS MAY BE NECESSARY TO MOUNT YOUR NEW GRASS CATCHER. NOT 
ALL MODEL TRACTORS WILL NEED THE FOLLOWING MODIFICATIONS. CHECK CARE FUL LY TO DETERMINE IF MODIFICATION 
IS REQUIRED. ONCE YOUR MODEL TRACTOR CONFORMS TO THIS SECTION PRO CEED TO ASSEMBLY. 
(1) Drill Motor
(1) 11/32" Drill Bit
To Prepare your Grass Catcher you will need:
PREPARATION
DRILL HOLE IN MOWER DECK HOUSING (See 
Fig. 12)
On some model tractors, it may be necessary to drill holes 
in the mower deck housing. If your mower deck does not 
have the holes. Drill two 11/32" holes as shown.
NOTE:  To assist in proper hole location, there is a tem plate 
in the back of this manual that may be used.
DRILL HOLES
FIG. 12