Poulan 532190226 User Manual
7
LOWER CHUTE (See Fig. 6)
1. Raise and hold defl ector shield in upright position.
2. Place slot in lower chute over tab on mower deck and
2. Place slot in lower chute over tab on mower deck and
position lower chute over deck opening as shown.
3. Hook rear and front latches.
6
CAUTION: Do not remove defl ector
shield from mower. Raise and hold
shield when attaching lower chute
and allow it to rest on chute while in
operation.
shield from mower. Raise and hold
shield when attaching lower chute
and allow it to rest on chute while in
operation.
FIG. 6
0210
1
UPPER CHUTE (See Figs. 7A & 7B)
1. Lower mower deck to its lowest cutting position.
2. Assemble upper chute by inserting curved end into
2. Assemble upper chute by inserting curved end into
hole in back of cover.
NOTE: Handle carefully so as not to damage dump bag-
ger indicator.
3. Push in and turn upper chute until it is in line with lower
ger indicator.
3. Push in and turn upper chute until it is in line with lower
chute.
4. Align the bosses on lower chute with alignment slots
on upper chute and slide together.
5. Secure with rubber latch by hooking hole in latch over
latch pin.
7
COVER
HANDLE
LOWER
CHUTE
CHUTE
DUMP BAGGER
INDICATOR
INDICATOR
UPPER
CHUTE
CHUTE
FIG. 7B
FIG. 7A
02100
BOSSES
LATCH PIN
ALIGNMENT
SLOT
SLOT
RUBBER
LATCH
LATCH
LEVEL MOWER DECK
• Be sure deck is properly leveled for best mower
per for man ce. See your tractors owner's manual for
ins truc tions
ins truc tions
8
02783
REAR LATCH
FRONT
LATCH
LATCH
DEFLECTOR
SHIELD
SHIELD
TAB