Poulan 178478 User Manual

5

NOTE:  For ease of assembly, you may wish to obtain the 
as sis tance of another person for mounting coverassembly 
to tractor.
1.    Position cover assembly on ground behind tractor as 

shown.

2.      Lift and rotate cover to align cover brackets with support 

assembly tubes.

3.    Slide cover assembly down onto the support tubes.

02532

02530

0253

1

1.   Remove and discard the upper bolt on both sides of 

the drawbar. Using the same holes, install the shoulder 
bolts supplied and tighten securely.

2.   Align support assembly pin with hole in drawbar and 

hang assembly over the shoulder bolts.

3.      Be sure support assembly is seated properly and secure 

with retainer spring supplied.