Alamo 00761808C User Manual

A96B 03/06

Operation Section 4-37

© 2006 Alamo Group Inc.

Properly preparing and storing the mower at the end of the season is critical to maintaining its appearance

and to help ensure years of dependable service.  The following are suggested storage procedures:

•

Thoroughly clean all debris off the mower to 
prevent damage from rotting grass and 
standing water.

•

Lubricate all mower grease points and fill 
gearbox oil levels as detailed in the 
maintenance section.

•

Tighten all bolts and pins to the recommended 
torque.

•

Check the mower for worn and damaged 
parts.  Perform repairs and make 
replacements immediately so that the mower 
will be ready for use at the start of the next 
season.

•

Store the mower in a clean, dry place with the 
mower housing resting securely on blocks or 
at ground level.

•

Keep the driveline yoke from sitting in water, 
dirt and other contaminants.

•

Use spray touch-up enamel where necessary 
to prevent rust and maintain the appearance 
of the mower. 

It is critical that driveline clutches slip when an obstacle or heavy load is encountered to avoid mower and/or

tractor damage.  If the mower sits outside for an extended period of time or is exposed to rain and/or humid

air, the clutch lining plates must be inspected to ensure they are not frozen together from rust or corrosion.  If

the mower has been exposed to such conditions, at the start of each mowing season, and any time it is

suspected that the slip clutch plates may be frozen together, readjust the slip clutch as detailed in Seasonal

Clutch Maintenance of the maintenance section in this manual.  OPS-R-0032_A

Never allow children or other persons to ride on the Tractor or Implement.

Falling off can result in serious injury or death.  

(SG-10)

Inherent dangers of operating the tractor and implement and the possibility of accidents are not left behind

when you finish working in an area.  Therefore, the operator must employ good judgement and safe operation

practices when transporting the tractor and implement between locations.  By using good judgement and

following safe transport procedures, the possibility of accidents while moving between locations can be

substantially minimized.  OPS-U- 0017