Alamo 00761808C User Manual

SAFETY

A96B 03/06

Safety Section 1-15

SAFETY

Concluding Safety Instructions and Practices

Replace bent or broken blades with new blades. NEVER ATTEMPT TO STRAIGHTEN OR

WELD ON BLADES SINCE THIS WILL LIKELY CRACK OR OTHERWISE DAMAGE THE

BLADE WITH SUBSEQUENT FAILURE AND POSSIBLE SERIOUS INJURY FROM THROWN BLADES.

(SGM-10)

DO NOT weld or repair rotating mower components. Welds and other repairs may cause

severe vibration and/or component failure resulting in part being thrown from the mower

causing serious bodily injury. See your Authorized Dealer for proper repairs.

(SGM-13)

PARTS INFORMATION

Alamo Industrial mowers use balanced and matched system components for blade carriers, blades,

cuttershafts, knives, knife hangers, rollers, drivetrain components, and bearings. These parts are made and

tested to Alamo Industrial specifications. Non-genuine "will fit" parts do not consistently meet these

specifications. The use of “will fit” parts may reduce mower performance, void mower warranties, and present

a safety hazard. Use genuine Alamo Industrial mower parts for economy and safety.

(SPAM-1)

SEE YOUR ALAMO DEALER

Be sure you have adequate knowledge of the property you will be working on. Take time to

make yourself aware of any area underground lines or cables. Contact with buried lines or

cable could result in serious injury or death.

(STL-1)

In wet conditions where there is a likelihood of material collecting on the Implement, make

certain that this material is removed before travelling on public roadways.

(STL-7)

In addition to the design and configuration of this Implement, including Safety Signs and Safety Equipment,

hazard control and accident prevention are dependent upon the awareness, concern, prudence, and proper

training of personnel involved in the operation, transport, maintenance, and storage of the machine. Refer

also to Safety Messages and operation instruction in each of the appropriate sections of the Tractor and

Equipment Manuals. Pay close attention to the Safety Signs affixed to the Tractor and Equipment.

(SG-18)