Toro 09168SL User Manual

21 

 
The following pages will cover basic requirements for cutting unit set-up and adjustment. Always use the 
instructions in the Operator’s Manual or Service Manual when working on a specific model. 
 
Reel mower performance depends on proper set–up, and adjustment procedures. An error of .010 inch or .25 
mm in height of cut, end–to–end, or from one cutting unit to another, can be visible as miss-match. Although 
there are design variations in cutting units, most require the same basic procedures. A surface plate, 
accurate height of cut tools, and proper instruction, are essential for setting up a cutting unit. 
 

To Maintain Performance

Check Daily

• Bedknife to reel adjustment
• Edge sharpness
• Height of cut

Check Periodically

• Roller condition
• Reel bearings
• Bedknife attitude
• Roller Parallelism
• General mechanical condition

 

Prior to mowing each day there are several items 
that should be checked. There are several more 
items that should be checked periodically, according 
to the mowing conditions and mowing frequency. 
 
 

Lubrication

 

Greasing should also be a part of your daily 
maintenance routine. Greaseable bearings should be 
greased after every use and after any washing. This 
not only lubricates, but purges water, which is 
responsible for the majority of bearing failures on this 
type of equipment.