Alamo 00785503C User Manual

Page of 166
To keep your implement running efficiently and safely, read your manual thoroughly and follow these directions and
the Safety Messages in this Manual.  The Table of Contents clearly identifies each section where you can easily find
the information you need.
The OCCUPATIONAL SAFETY AND HEALTH ACT  (1928.51 Subpart C) makes these minimum safety require-
ments of tractor operators:
REQUIRED OF THE OWNER:
1.  Provide a Roll-Over-Protective Structure that meets the requirements of this Standard; and
2.  Provide Seatbelts that meet the requirements of this paragraph of this Standard and SAE J4C; and
3.  Ensure that each employee uses such Seatbelt while the tractor is moving; and
4.  Ensure that each employee tightens the Seatbelt sufficiently to confine the employee to the protected 
area  provided by the ROPS.
REQUIRED OF THE OPERATOR
1.  Securely fasten seatbelt if the tractor has a ROPS.
2.  Where possible, avoid operating the tractor near ditches, embankments, and holes.
3.  Reduce speed when turning, crossing slopes, and on rough, slick, or muddy surfaces.
4.  Stay off slopes too steep for safe operation.
5.  Watch where you are going - especially at row ends, on roads, and around trees.
6.  Do not permit others to ride.
7.  Operate the tractor smoothly - no jerky turns, starts, or stops.
8.  Hitch only to the drawbar and hitch points recommended by the tractor manufacturer.
9.  When the tractor is stopped, set brakes securely and use park lock, if available.
TO THE OWNER/OPERATOR/DEALER
Keep  children  away  from  danger  all  day,  every day...
Equip tractors with rollover protection (ROPS) and keep all machinery
guards in place...
Please  work,  drive,  play  and  live  each  day  with  care and  concern  for
your  safety  and   that  of  your  family and  fellow  citizens.