Kenwood JK060A Leaflet
●
This kettle complies with European
Economic Community Directive
89/336/EEC.
Economic Community Directive
89/336/EEC.
before using for the first
time
●
Remove all packaging and any
labels.
labels.
●
Remove the cups and spoons
from the kettle.
from the kettle.
●
Fill to ‘MAX’, boil, then pour the
water away.
water away.
●
Wash the cups and spoons and
then dry.
then dry.
key
lid
on/off switch
neon light
water level gauge
scale filter
2 cups
2 spoons
dual voltage selector
cord clip
on/off switch
neon light
water level gauge
scale filter
2 cups
2 spoons
dual voltage selector
cord clip
to use your travel jug
kettle
kettle
1 Remove the cups and spoons
from the kettle.
2 Select the required voltage by
turning the selector control
.
Always check that you have
selected the correct voltage
before using the kettle.
3 Fill it through the spout or lid. The
water level must be between
“MAX” and “MIN” (1 cup/approx.
200mls).
“MAX” and “MIN” (1 cup/approx.
200mls).
4 Check the lid is closed.
5 Plug in and switch on. The neon
5 Plug in and switch on. The neon
will come on.
6 Your kettle will boil and switch off
automatically. To re-boil, wait a
few seconds - the on/off switch
needs time to reset.
few seconds - the on/off switch
needs time to reset.
●
If you experience problems
with your kettle switching
on and off during use or
switching off before boiling,
check that the flat element
is free from scale - see
“descaling”.
7 Always unplug the kettle after use.
●
Take care when using the cups
and do not overfill above the inner
rim (approx. 200mls).
and do not overfill above the inner
rim (approx. 200mls).
●
Your kettle is fitted with a scale
filter to hold back limescale
particles.
filter to hold back limescale
particles.
●
If you find drops of water under
your kettle, don’t worry - it is just
condensation.
your kettle, don’t worry - it is just
condensation.
boil-dry protection
●
If you switch on with too little
water, your kettle will cut out
automatically. Switch off and let it
cool down before re-filling. When it
has cooled down, the switch will
reset itself.
water, your kettle will cut out
automatically. Switch off and let it
cool down before re-filling. When it
has cooled down, the switch will
reset itself.
approximate boiling times
220/240 volts approx 5 minutes
for 450 mls (maximum)
110/120 volts approx 5 minutes 40
seconds for 450 mls (maximum)
for 450 mls (maximum)
110/120 volts approx 5 minutes 40
seconds for 450 mls (maximum)
care and cleaning
●
Before cleaning, unplug your kettle
and let it cool down.
and let it cool down.
●
The cups and spoons can be
placed in the kettle for compact
storage.
placed in the kettle for compact
storage.
●
Wrap the cord around the kettle
and secure using the cord clip
and secure using the cord clip
.
the outside
●
Wipe with a damp cloth, then dry.
Do not use abrasives - they will
scratch the plastic surfaces.
Do not use abrasives - they will
scratch the plastic surfaces.
the inside
●
Even though your kettle comes
with a scale filter, you still need to
clean the inside (and the filter)
regularly.
with a scale filter, you still need to
clean the inside (and the filter)
regularly.
safety
●
Your kettle has a dual
voltage selector
on the
underside of the kettle.
Always check that you have
selected the correct voltage
before using the kettle.
●
Avoid contact with steam coming
out of the spout area when
pouring and out of the lid when
refilling.
out of the spout area when
pouring and out of the lid when
refilling.
●
Keep small children away from the
kettle and never let the cord hang
down over the worktop edge - a
child could grab it and pull the
kettle down.
kettle and never let the cord hang
down over the worktop edge - a
child could grab it and pull the
kettle down.
●
Never overfill - boiling water may
splash out.
splash out.
●
Never put the kettle, cord or plug
in liquid.
in liquid.
●
Always unplug your kettle
when not in use.
●
Do not use if there is any damage
to the kettle, cord or plug. Get it
checked or repaired: see ‘service’.
to the kettle, cord or plug. Get it
checked or repaired: see ‘service’.
●
Caution: Do not operate the
kettle on an inclined surface.
kettle on an inclined surface.
●
Make sure the lid is secure before
switching the kettle on.
switching the kettle on.
●
Warning: Do not open the lid
while the water is boiling.
while the water is boiling.
●
Make sure the kettle is switched
off before lifting or pouring.
off before lifting or pouring.
●
Unplug the kettle before filling or
pouring.
pouring.
●
Never put the kettle near or on
cooker hot plates or gas burners.
cooker hot plates or gas burners.
●
This kettle is for boiling water only.
●
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use of
the appliance by a person
responsible for their safety.
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use of
the appliance by a person
responsible for their safety.
●
Children should be supervised to
ensure that they do not play with
the appliance.
ensure that they do not play with
the appliance.
●
Only use the appliance for its
intended domestic use. Kenwood
will not accept any liability if the
appliance is subject to improper
use, or failure to comply with these
instructions.
intended domestic use. Kenwood
will not accept any liability if the
appliance is subject to improper
use, or failure to comply with these
instructions.
before plugging in
●
Make sure your electricity supply is
the same as the one shown on the
underside of your kettle.
The JK60 travel kettle is of class 1
construction and should only be
used in an EARTHED socket. Any
travel plug adapter used MUST
provide an earth connection.
the same as the one shown on the
underside of your kettle.
The JK60 travel kettle is of class 1
construction and should only be
used in an EARTHED socket. Any
travel plug adapter used MUST
provide an earth connection.
Important – UK only
●
The wires in the cord are coloured
as follows:
Green and Yellow = Earth,
Blue = Neutral,
Brown = Live.
as follows:
Green and Yellow = Earth,
Blue = Neutral,
Brown = Live.
●
The appliance must be protected
by a 13A approved (BS1362) fuse.
by a 13A approved (BS1362) fuse.
●
WARNING: THIS APPLIANCE
MUST BE EARTHED.
Note:
●
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
●
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is
inadvertently inserted into a 13A
socket outlet.
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is
inadvertently inserted into a 13A
socket outlet.
2
- 220-240V
- 120V
max
2
1
max
2
max
2