Poulan PB22H54YT User Manual

Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping pur-
poses.  

When right or left hand is mentioned in this man ual, it 
means from your point of view, when you are in the operat-
ing po si tion (seated be hind the steer ing wheel).

•      Remove all accessible loose parts and parts cartons  

from carton .

•      Cut along dashed lines on all four panels of carton. 

Remove end panels and lay side panels fl at.

•     Check for any additional loose parts or cartons and 

remove.

•      Lift hood to raised position.

NOTE: If this battery is put into service after month and year 
indicated on label (L) (label is located between terminals) 
charge battery for minimum of one hour at 6-10 amps. 
(See "BATTERY" in Maintenance  section of this manual 
for charging instructions).

02931

(2) Keys

(1) Wheel

(5) Large Retainer

Springs - 7/16

(2) Smaller Retainer

Springs - 5/16

(1) Locknut

3/8-16

(1) Oil Drain Tube
For Future Use

(1) Shoulder Bolt

(1) 3/4 O.D. Washers

(1) Anti-Sway Bar

(1) Front Link

Assembly

(1) 1-1/4 O.D. Washer

(5) 1-3/16 O.D. Washers

(2) Rear Lift Link

Assemblies

•      Sit in seat.
•      Lift up adjustment lever (A) and slide seat until a com-

fortable position is reached which allows you to press 
clutch/brake pedal all the way down.

•      Release lever to lock seat in position.