New Holland 918H Leaflet
New Holland
Flail Mower Specifications
918H 918L
Page 1 of 1
MODEL
918H
918H
918H
SIZE
60-inch
71-inch
91-inch
PTO hp rating............................................................................................................................................................70...............................................................................................
Rated speed (rpm)...................................................................................................................................................540..............................................................................................
Nominal cutting width, in. (mm)
Rated speed (rpm)...................................................................................................................................................540..............................................................................................
Nominal cutting width, in. (mm)
60 (1524.0)
71 (1803.4)
88 (2235.2)
Offset adjustment to right, in. (mm)
28 (711.2)
28 (711.2)
24 (609.6)
Offset adjustment to left, in. (mm)
n/a
4
6
Cutting height range, in. (mm)
0.5 to 5 (13 to 127)
0.5 to 5 (13 to 127)
0.8 to 5 (19 to 127)
Cutting height adjustment increments, in. (mm).................................................................................................1 (25.4) ..........................................................................................
Rotor diameter, tip-to-tip, in. (mm)
Rotor diameter, tip-to-tip, in. (mm)
15.8 (401.32)
15.8 (401.32)
16.50 (419.1)
Rotor rotation.................................................................................................................................................forward/reverse ....................................................................................
Guage roller diameter, in. (mm) ........................................................................................................................5.2 (132.1)........................................................................................
Blade mounting .................................................................................................................................................single hinge .......................................................................................
Blade type ............................................................................................................................................................standard..........................................................................................
Number of blades
Guage roller diameter, in. (mm) ........................................................................................................................5.2 (132.1)........................................................................................
Blade mounting .................................................................................................................................................single hinge .......................................................................................
Blade type ............................................................................................................................................................standard..........................................................................................
Number of blades
80
96
128
Blade tip speed (fpm)
9237
9237
9659
Rotor shaft speed (rpm) .........................................................................................................................................2236.............................................................................................
Thickness of flail deck, in. (mm) ........................................................................................................................0.16 (4.0).........................................................................................
Thickness of flail ends, in. (mm) ........................................................................................................................0.24 (6.0).........................................................................................
Lift linkage.............................................................................................................................................................flexible ...........................................................................................
Three-point hitch category .....................................................................................................................................I or II ............................................................................................
Weight, lbs. (kg)
Thickness of flail deck, in. (mm) ........................................................................................................................0.16 (4.0).........................................................................................
Thickness of flail ends, in. (mm) ........................................................................................................................0.24 (6.0).........................................................................................
Lift linkage.............................................................................................................................................................flexible ...........................................................................................
Three-point hitch category .....................................................................................................................................I or II ............................................................................................
Weight, lbs. (kg)
697 (316.2)
792 (359.3)
957 (434.1)
MODEL
918L
918L
SIZE
50-inch
60-inch
PTO hp rating ...........................................................................................................................30 ...............................................................................................................................
Rated speed (rpm) ..................................................................................................................540 ..............................................................................................................................
Nominal cutting width, in. (mm)
Rated speed (rpm) ..................................................................................................................540 ..............................................................................................................................
Nominal cutting width, in. (mm)
50 (1270)
60 (1524)
Offset adjustment to right, in. (mm)
10 (254)
20 (508)
Offset adjustment to left, in. (mm) ..........................................................................................n/a...............................................................................................................................
Cutting height range, in. (mm)...................................................................................0.75 to 3 (19 to 76) .................................................................................................................
Cutting height adjustment increments, in. (mm) ..............................................................0.75 (19.1) ........................................................................................................................
Rotor diameter, tip-to-tip, in. (mm) .................................................................................13.5 (342.9) .......................................................................................................................
Rotor rotation .......................................................................................................................reverse ...........................................................................................................................
Guage roller diameter, in. (mm) .........................................................................................3.5 (88.9) .........................................................................................................................
Blade mounting.................................................................................................................single hinge .......................................................................................................................
Blade type ................................................................................................................................fine ..............................................................................................................................
Number of blades
Cutting height range, in. (mm)...................................................................................0.75 to 3 (19 to 76) .................................................................................................................
Cutting height adjustment increments, in. (mm) ..............................................................0.75 (19.1) ........................................................................................................................
Rotor diameter, tip-to-tip, in. (mm) .................................................................................13.5 (342.9) .......................................................................................................................
Rotor rotation .......................................................................................................................reverse ...........................................................................................................................
Guage roller diameter, in. (mm) .........................................................................................3.5 (88.9) .........................................................................................................................
Blade mounting.................................................................................................................single hinge .......................................................................................................................
Blade type ................................................................................................................................fine ..............................................................................................................................
Number of blades
80
96
Blade tip speed (fpm) ............................................................................................................7,522.............................................................................................................................
Rotor shaft speed (rpm) ........................................................................................................2,137.............................................................................................................................
Thickness of flail deck, in. (mm).........................................................................................0.1 (2.5) ..........................................................................................................................
Thickness of flail ends, in. (mm).........................................................................................0.2 (5.0) ..........................................................................................................................
Lift linkage ..............................................................................................................................fixed .............................................................................................................................
Three-point hitch category ........................................................................................................ I ................................................................................................................................
Weight, lbs. (kg)
Rotor shaft speed (rpm) ........................................................................................................2,137.............................................................................................................................
Thickness of flail deck, in. (mm).........................................................................................0.1 (2.5) ..........................................................................................................................
Thickness of flail ends, in. (mm).........................................................................................0.2 (5.0) ..........................................................................................................................
Lift linkage ..............................................................................................................................fixed .............................................................................................................................
Three-point hitch category ........................................................................................................ I ................................................................................................................................
Weight, lbs. (kg)
348 (157.9)
383 (173.7)
Safety begins with a thorough understanding of
the equipment.
Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention
to
all
safety
and
operating
decals and never operate machiner y
without all shields, protective devices
and structures in place.
Design,
materials
and/or
specifications are
subject to
change
without
notice
and
without
liability
therefor.
Specifications are applicable to units sold in Canada, the
United States, its territories and possessions, and may
var y outside these areas.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Visit our Web site at www.newholland.com/na. Or, call toll-free 866-NEW-HLND (866-639-4563).