Snapper 1694153 User Manual

Initial Assembly &
Installation

Figure 1. Install Side Brackets
A. Nylock Nut, 3/8-16

C. 3/8-16 x 1

B. Side Bracket

Figure 2. Install Rear Spacers
A. Nylock Nuts, 1/2-13

C. Spacers

B. 1/2-13 x 2-1/2 Capscrew

D. 1/2” Washers

Figure 3. Install Rear Spacers
A. Nylock Nuts, 1/2-13

C. Spacers

B. 1/2-13 x 2-1/2 Capscrew D. 1/2” Washers

INSTALL MOUNTING PLATES -
BROADMOOR / 1600 / 2600 / LT
SERIES

Install Plates & Spacers

1. Mount the side brackets (B, Figure 1) to both sides of

the frame using the holes shown. Secure with one
3/8-16 x 1 capscrew (C) and 3/8-16 nylock nut (A)
per side.

2. Install the rear spacers (C, Figure 2). Secure with

two 1/2-13 x 2-1/2 capscrews (E), washers (D), spac-
ers (C), and 1/2-13 nylock nuts (A) per side.

INSTALL MOUNTING SPACERS -
CONQUEST / 1700 / 2700 / YT &
PRESTIGE / 1800 / 2800 / GT SERIES

NOTE: If installing this catcher on a unit equipped with a
rear tiller, refer to the “Installation with a Tiller” section for
special installation instructions.

Install Spacers

1. Install the rear spacers (C, Figure 3). Secure with

two 1/2-13 x 2-1/2 capscrews (E), washers (D), spac-
ers (C), and 1/2-13 nylock nuts (A) per side.