Hayter Mowers RT380H User Manual
Figure 42
1.
Fill plug
5. Remove the fill plug and check the fluid level.
Note: The level should be a maximum of 1-1/4 inch
(32 mm) below the top of the fill port (Figure 42).
Add fluid if necessary.
(32 mm) below the top of the fill port (Figure 42).
Add fluid if necessary.
6. Install the fill plug.
Cooling System
Maintenance
Maintenance
Cleaning the Cooling System
Service Interval: Every 100 hours
Use a dry brush to clean grass and accumulated debris
from the engine daily.
from the engine daily.
Important: To prevent contaminating the fuel
system, do not use water to clean the engine.
system, do not use water to clean the engine.
33