Snapper 151-3845 User Manual

20

51-3845,  7/04

NOTE – Whenever removed, install clevis pins, hitch

pins, clips and hardware into the sweeper and
hitch for storage.

1.

Install stands in storage position and fully lower
the attachment lift.

2.

Disconnect the drive shaft by pulling back on the
locking collar and then pulling the shaft off.

3.

Disconnect hydraulic hoses. Disconnect hairpins
and remove clevis pins. Slide hitch assembly off
the slots on the tractor.

4.

Detach the sweeper from the sweeper hitch by
moving the shot pins into open position.

5.

Lower the hitch to the ground and back out.

OPERATION SECTION
REMOVING SWEEPER AND HITCH