Exmark Turf Tracer HP User Manual

 

- 7 - 

POTENTIAL HAZARD 

♦

  Hydraulic fluid escaping under pressure can penetrate 

skin and cause injury. 

WHAT CAN HAPPEN 

♦

  Fluid accidentally injected into the skin must be 

surgically removed within a few hours by a doctor 
familiar with this form of injury or gangrene may result. 

HOW TO AVOID THE HAZARD 

♦

  Make sure all hydraulic fluid hoses and lines are in 

good condition an all hydraulic connections and fittings 
are tight before applying pressure to hydraulic system. 

♦

  Keep body and hands away from pinhole leaks or 

nozzles that eject high pressure hydraulic fluid. 

♦

  Use cardboard or paper and not hands to find 

hydraulic leaks. 

♦

  Safely relieve all pressure in the hydraulic system, by 

locking drive levers in neutral and shutting off engine, 
before performing any work on the hydraulic system. 

 

1.6.1 

Use only Exmark riding attachments.  The use of other than Exmark riding 
attachments may create a hazardous condition resulting in injury. 

 

1.7.1 

Keep all safety signs legible.  Remove all grease, dirt, and debris from safety 
signs and instructional labels. 

 

1.7.2 

Safety signs must be replaced if they are missing or illegible. 

 

1.7.3 

When new components are installed, be sure that current safety signs are 
affixed to the replaced components. 

 

1.7.4 

New safety signs may be obtained from your authorized Exmark equipment 
dealer or distributor or from Exmark Mfg. Co. Inc. 

 

1.7.5 

Safety signs may be affixed by peeling off the backing to expose the adhesive 
surface.  Apply only to a clean, dry surface.  Smooth to remove any air bubbles. 

1.7.6 

Familiarize yourself with the following safety signs and instruction labels.  They 
are critical to the safe operation of your Exmark commercial mower. 

PART NO. 1-303517 
LOCATION: Left Side of Rear  
                    Surface of Engine

 

Deck 

PART NO. 1-303508 
LOCATION: Right Front of Mower  
                    Deck Top Surface