Hayter Mowers 445E User Manual

Page of 24
Figure 24
4. Slowly pour oil into the oil fill tube until the oil
level reaches the Full line on the dipstick (Figure 6).
Do not overfill. (Max. fill: 0.59 l, type: SAE 30W
detergent oil with an API service classification of SF,
SG, SH, SJ, SL, or higher.)
5. Install the dipstick securely.
6. Dispose of the used oil properly at a local recycling
center.
Electrical System
Maintenance
Charging the Battery (Model
447E Only)
Service Interval: Every 25 hours—Charge the battery
for 24 hours. (Model 447E only)
Always use the charger in a sheltered area and charge the
battery at room temperature (22° C) whenever possible.
1. Connect the charger to the mower wire harness
located below the ignition key (Figure 25).
Figure 25
2. Plug the charger into a wall outlet.
Note: When the battery no longer holds a charge
dispose of the lead-acid battery.
Replacing the Fuse (Model
447E Only)
If the battery does not charge or the engine does not run
with the electric starter, the fuse may be blown. Replace
it with a 40-amp plug-in type fuse. Refer to Installing
the Fuse.
15