Holder C 9.72 H User Manual
C 9700 ... C 9.88 H
Operating Instructions
106
145 052
Operating the Implements
Operating the Hydraulic Carrier* (Power Lifter)
1 Pressure adjuster
2 ON-OFF plate
3 Star knob for turning on/off
2 ON-OFF plate
3 Star knob for turning on/off
The hydraulic carrier allows for a weight compensation
between implement and tractor. This increases the axle load
and the climbing ability is improved. During road travel with
a lifted implement, the hydraulic system absorbs shocks
due to bumps in the road.
between implement and tractor. This increases the axle load
and the climbing ability is improved. During road travel with
a lifted implement, the hydraulic system absorbs shocks
due to bumps in the road.
-
Turn the star knob (3) to the left (ON position).
-
Screw in the pressure adjuster (1) as far as possible.
-
Raise the implement with the front lift.
-
Read the pressure at the pressure gauge (4) at the
driver's station (eg 100 bar) and select the float
position.
driver's station (eg 100 bar) and select the float
position.
-
Screw out the pressure adjuster (1) until the pressure
gauge indicates, for example, 50 bar (implement
resting on ground). The selected pressure corre-
sponds to the carried weight.
gauge indicates, for example, 50 bar (implement
resting on ground). The selected pressure corre-
sponds to the carried weight.
-
Lower and raise the implement with the front lift.
1
3
2
4
* Option