Holder C 9.72 H User Manual

-

Run the engine warm to operating temperature.

-

Set the heating control to high.

-

Place the tractor on level ground and turn off the
engine.

-

Place a suitable oil pan underneath the engine.

CAUTION
Danger of scalding when draining hot engine
oil.

-

Unscrew the oil drain plug.

-

Allow the oil to run out completely.

ATTENTION
Observe the instructions for handling fuels
and lubricants.

-

Screw the oil drain plug  in again with a new seal and
tighten to a torque of 55 Nm.

-

Fill new engine oil at the filler neck (1). Only use
recommended engine oil.

-

Let the engine idle shortly.

-

After approx. 1 minute, check the oil level with the
dipstick (2).

Bild_189

1

2

Bild_188