Holder C 9.72 H User Manual

See the operating manual of the engine manufacturer.

-

Remove the fuel filter cartridge with a filter wrench.

ATTENTION
Observe the instructions for handling fuels
and lubricants.

-

Clean the mating surface of the filter mount.

-

Coat the new seal with oil.

-

Install and hand tighten the new filter cartridge with a
new seal in the filter mount.

NOTE
The fuel system bleeding takes place auto-
matically.

See the operating manual of the engine manufacturer.

See the operating manual of the engine manufacturer.

CAUTION
Adjust V-belt tension only when the engine is
shut off.

-

Inspect V-belts for cracks and tears over their entire
length.

-

Replace damaged V-belts.

-

Using thumb pressure, check if the V-belt can not be
depressed more than 10 - 15 mm.

-

To tighten the V-belt: Loosen the idler pulley mounting
screws and push the pulley outwards until the proper
V-belt tension is reached.

-

Tighten the idler pulley mounting fastening screws.