Holder C 9.72 H User Manual
C 9700 ... C 9.88 H
Operating Instructions
84
145 052
Special Operating Instructions
Operation in Winter
Preheating of Oil*
Before starting the engine at temperatures below - 20 °C,
turn on the heating element* for preheating the oil.
Before starting the engine at temperatures below - 20 °C,
turn on the heating element* for preheating the oil.
-
Connect the preheating system plug to a 230 VAC
(U.S.: 120 V) source.
(U.S.: 120 V) source.
Follow the Operating Instructions of the manufacturer.
Winter Diesel Fuel
Whenever temperatures fall below 0 °C, use winter diesel or
super diesel fuel or additives recommended in the
maintenance manual.
super diesel fuel or additives recommended in the
maintenance manual.
Engine Oil for Winter Operation
Fill engine oil with a suitable SAE class as recommended
the maintenance manual.
The cold start capability of the engine can be reduced if the
temperature limits are underrun occasionally, but this does
will not damage the engine.
the maintenance manual.
The cold start capability of the engine can be reduced if the
temperature limits are underrun occasionally, but this does
will not damage the engine.
Hydraulic System
The hydraulic functions are sluggish and slower during cold
temperatures. Bring the hydraulic system to operating
temperature by operating it without a load.
temperatures. Bring the hydraulic system to operating
temperature by operating it without a load.
Putting on Snow Chains
Snow chains can be mounted on the tires to improve grip.
In the following table you will find the order numbers for
RUD chains which fit on the listed tires. You can also fit
snow chains from other manufacturers if these have the
proper dimensions.
In the following table you will find the order numbers for
RUD chains which fit on the listed tires. You can also fit
snow chains from other manufacturers if these have the
proper dimensions.
Ballast Weights
The weight of the machine can be increased with ballast
weights. The ballast weights must be applied parallel with
the same weight on each axle and side.
weights. The ballast weights must be applied parallel with
the same weight on each axle and side.
* Option
Tires
Snow chain type
(RUD Order No.)
(RUD Order No.)
10.5-18 MPT
24 553 and 22 553
400/60-15.5
22 177
33x12.50 R 15/33x12.5-15
22 167
33x15.50-15
22 174
31x15.50-15 Terra
22 548
36x13.5-15
24 178